L-5A is a two ways active Line array system.
It is application for the large square arena where need to keep the high clear,natural voice.
It is composed of two low-distortion 1.7 inch Neo HF drivers and two 10 inch MF driver with VC65mm, and it is desiged with the Butterfly axial symmetry structure and coverage technology, distortion-free wavefront coverage.
It is good at equal direction from long distance, and avoids interference at most;therefore, it is very helpful to improve the expanding quality.
The 1200W internal High effective amplifier is used on the MF,and the 450W A/B amplifier is used on the HF.
It means that you can also connect to passive 500w L-5 flown below for full 4ohm loading.
The complete RS232 Cat5 electrocircuit controll system include the 0~24db crossover point range, Phase switch each channel,Crossover and Passive filter,parametric EQ .
So that it can perform high and reliable sound pressure .
The application of the switch mode psu makes the loudspeaker lighter.
You also can connect with the PC in order to controll the system in long distance.
This system is suitalbe for Small-medium ball room,Disco, and Stage performance ,Theater ect.
L5a Active Line array cab £750 plus vat Trade
L5 passive extension speaker £500 plus vat Trade
·Frequency response:70Hz~20KHz (±3dB)
·MF rated power: 500 W ( RMS )
·MF program power: 1000 W ( Peak )
·HF rated power: 150W (RMS )
·HF program power: 300 W (Peak)
·Driver Components:2x10"MF + 2x1.75"Hi Neo
·Sensitivity (1 W/m):104dB mid/ 110db HF
·Rated Maximum SPL:128dB ( peak@1m)
·Dispersion(HXV):10°X 120° . H coverage will increase by stacking cabs in a J curve line
·Input Impedance:20K Ohm
·Input Sensitivity:0.775v
·Output power:400W+1500W Rms/4 ohm (if conected to an 8ohm L5 passive)
·Distortion:Less than 0.05% Speakon link output to passive second L5
·Damping Factor:more than 250
·Power Connectors:Power Con
·Operating Voltage:100V,120V,220V,240V,50Hz
·Colors:Black textured paint
·Net Weight:49kg L5a, passive version: L5
·Shipping Size:0.16CBM/PC
·Dimensions(WxDxH mm):998x480x328
Can be Paired and pre rigged in custom maded foam linned Flightcased for £200
Flying Frames, Chain hoist, Mains, speakon, line, and Cat5 patch leads availible